Auto Repair Santa Cruz

Phone (831) 425-1773

30/45/60/90K Mileage Service

As the expression goes "if you take care of your car, it will take care of you."  Regular maintenance protects your vehicle from early break downs and can help ensure you don't end up on the side of the road with a breakdown.  Most car manufacturers recommends the following services when the speedometer reads:  30K 45K, 60K & 90 thousand miles.

We follow the manufacturer's guidelines for maintenance.  All inspections and services are performed per your car's manufacturer to maintain your factory warranty as well as your vehicle.

For each mileage maintenance service, we change the engine oil, install a new oil filter, check and fill fluids, check tire pressure and conduct a series of system inspections according to the manufacturers' specifications.  Each manufacturer may call out specific items to check and/or replace (i.e. tune-up items) such as:

30/60/90 Service Items

  • Exhaust System
  • Belts & Hoses
  • Throttle Linkage
  • Transmission & Linkage
  • EGR System
  • Engine Charging System and Battery
  • Brakes
  • Air Filter
  • Fuel Filter
  • Cabin Air Filter
  • Crank case vent filter
  • Vapor canister filter
  • PCV valve
  • Engine sensors, including oxygen sensor
  • Plugs, Wires, Dist. Cap & Rotor
  • Front & Rear Shocks 
  • C/V Boots & Joints
  • Driveline & U-Joints
  • Steering & Suspension Components
  • Wiper Blades
  • Brake System Fluid Flush - Purge All System Air & Fill Master Cylinder
  • Vacuum-Pressured Brake Fluid Evacuation & Replenishment
  • Conduct a Road Test
  • Deluxe Transmission System Flush – Complete Exchange of Transmission Cooler/Torque Converter Fluid
  • Deluxe Cooling Flush - Complete Fluid Exchange & Refill with Proper Anti-Freeze Amount
  • Power Steering System Flush - Complete Power Steering System Fluid Exchange Including Pump, Rack & Cooler (if applicable) & System Conditioner.
  • Differential Fluid Flush

45,000K Services

This service is the same as the 30/60/90K Maintenance Package, but also includes these cleansing measures:

  • Fuel Injection & Throttle Plate Service
  • Fuel Induction Service
  • Clean Fuel Injectors & Throttle Body
  • De-carbonize Engine to Improve Drivability, Remove Valve, Injector & Piston Deposits
  • Throttle Body/Plenum Service
  • Clean Throttle Body Blade, Throat & Idle Air Control Passages Using a Specially-Designed Chemical Atomizer
  • Clean Intake Plenum Runners, Remove Valve & Piston Deposits